Mixer View
DAW-style channel strip mixer for monitoring and controlling all audio channels in your measurement system
What is the Mixer?
The Mixer provides a familiar DAW-style interface for monitoring and controlling all audio channels in AudioMap. Each channel type — source, receiver, reference, playback, and output — gets its own channel strip with faders, metering, mute/solo, and a compact EQ display.
Channel Strip Types
Source
Output channels routed to speakers. Controls generator output level for each source.
Receiver
Input channels from microphones. Monitor mic levels and verify signal presence.
Reference
Reference loop channels for timing synchronization. Monitor reference signal quality.
Playback
Audio playback channels for tuning preview. Routes external audio through correction filters.
Output
Final output channels to your audio interface. Master level and routing control.
Channel Strip Controls
Fader
Vertical fader for level control with precise dB readout. Click to type exact values.
Level Meter
Peak and RMS metering with clip indicators. Color-coded: green (normal), yellow (caution), red (clip).
Mute / Solo
Mute individual channels or solo to isolate. Solo is exclusive — only soloed channels pass audio.
Compact EQ
Miniature frequency response curve showing the EQ applied to the channel. Click to open full EQ editor.
Channel Label
Configurable name and color. Double-click to rename. Color matches source/receiver assignment.
Master Strip
The master strip provides global level control and metering for the final output. It sits at the right edge of the mixer and shows the summed output of all active channels.
Gain Staging
Set individual channel faders to achieve the desired signal-to-noise ratio, then use the master fader to control overall output level. This prevents clipping while maintaining maximum dynamic range.